In the open body pinch valve the valve actuator operates the stem and disc to perform an opening and closing of the valve. The open body is made of the carbon steel or stainless steel based upon the customer’s requirement.

In open body pinch valve the rubber liner is placed between two halves of the metal flange at the time of the assembly process and the two these two halves are connected with the top and bottom supports. The top support is threaded where the hand-wheel stem is fitted.

The open design offers light weight, easy operation and easy inspection of the pinch valve best suited for the non hazardous media only.

Operation of the open body pinch valve

The desired operation can be achieved by turning the hand wheel clockwise to close the valve, whereas to the opening of the gate valve can be achieved by turning the hand wheel in the counter clockwise direction.

Best feature of the open body pinch valve:

Open Body Pinch Valve Manufacturer , Exporter

Other Features

Specification of open body pinch valve

Body Type Open
Body Material Ductile iron (CRN available) or aluminum
Available size 1″ (25mm) to 60″ (1500mm)
Standard Face-to-Face ASME B-16.10, DIN 3202, ISO 5732
Temperature -50deg F to 250deg F
Actuator options Manual self-lubricating hand wheel embedded with gear reducer (optional)
In-Line Tube Change Yes
Wear Sensor Yes, option available
Max. Working Pressure Up to 300psi (20bar) (consult for higher pressures)
Material NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

Note: We offer pinch valve standard sleeve, pinch valve double wall sleeve and pinch valve hour glass sleeve, pinch valve funnel sleeve so as you can select the sleeve as per your requirement. In addition, provide wide assortments in actuator and elastomer to meet the exact need of yours.

Request A Quote X
Scroll to Top