In electric actuator pinch valve, electric motor is used to permit the manual, semi automatic and automatic operation of the pinch valve. The motor that we have used in the electric actuator pinch valve is reversible, which facilitate opening and closing function in the pinch valve. There are two ways to operate the actuator in the pinch valve, either by the position of the valve or by the torque of the motor. We have provided the limit switch with the electric actuator pinch valve manufacturer to stop the motor at the complete close or complete open status.
Best Feature of Electric Actuator Pinch Valve
- Easily configure with any type of electric actuator
Other Features of Electric Actuator Pinch Valve
- Face to face standard
- Whole body is rust proof: interior and exterior
- Fusion bonded epoxy coating for protections of steel valve
- Inline and quick tube change reduce the dropping time
- Patented tube folds offer high durability
Specification of Electric actuator pinch valve
| Body Type | Enclosed or Sealed |
| Body Material | Ductile iron (CRN available) or aluminum |
| Available size | 1″ (25mm) to 60″ (1500mm) |
| Standard Face-to-Face | ASME B-16.10, DIN 3202, ISO 5732 |
| Temperature | -50deg F to 250deg F |
| Actuator options | Electric Actuator or manual hand wheel (120V, 240V, 360V, or 480V) |
| In-Line Tube Change | Yes |
| Wear Sensor | Yes, option available |
| Max. Working | Pressure Up to 300psi (20bar) (consult for higher pressures) |
| Material | NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM |
Note: We offer pinch valve standard sleeve, pinch valve double wall sleeve and pinch valve hour glass sleeve, pinch valve funnel sleeve so as you can select the sleeve as per your requirement. In addition, provide wide assortments in actuator and elastomer to meet the exact need of yours.