Hydraulic actuator pinch valves are operated using fluid pressure to provide automatic and semi automatic positioning of the valve. In the Hydraulic actuator pinch valve Manufacturer the spring is equipped into the Pinch Valve Exporter facilitate to hold the valve in the closed position when there is no fluid pressure applied. When the fluid enters and the hydraulic force of the fluid reaches higher than the spring force, the piston changes the position to upward and the valve opens. For the closing operation of the valve the fluid fed into any side of the piston whereas the other side is drained to accomplish closing.
Best feature of Hydraulic Actuator Pinch Valve
- Small size offers the best usability at the tight spaces
Other Features of Hydraulic Actuator Pinch Valve
- Whole body is rust proof: interior and exterior
- Fusion bonded epoxy coating for protections of steel valve
- Inline and quick tube change reduce the dropping time
- patented tube folds offer high durability
- Face to face standard
Specification of Hydraulic actuator pinch valve
| Body Type | Enclosed or Sealed |
| Body Material | Ductile iron (CRN available) or aluminum |
| Available size | 1″ (25mm) to 60″ (1500mm) |
| Standard Face-to-Face | ASME B-16.10, DIN 3202, ISO 5732 |
| Temperature | -50deg F to 250deg F |
| Actuator | Hydraulic |
| In-Line Tube Change | Yes |
| Wear Sensor | Yes, option available |
| Max. Working | Pressure Up to 300psi (20bar) (consult for higher pressures) |
| Material | NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM |
Note: We offer pinch valve standard sleeve, pinch valve double wall sleeve and pinch valve hour glass sleeve, pinch valve funnel sleeve so as you can select the sleeve as per your requirement. In addition, provide wide assortments in actuator and elastomer to meet the exact need of yours.